null

Torx Screw Upgrade

(5 reviews) Write a Review
$3.00
Free Shipping
RailScales Custom US-Made Torx 20 T20 #8-32 MLOK Stainless Steel Screws

Product Overview

RailScales Torx Screws -Upgrade your RailScales products from the legacy 3/32 Hex fasteners to our custom US made Torx T20 drive screws. Easily identifiable by the two dimple dots on the head stamp. Our screws are cold-headed out of 18-8 Stainless Steel, coated in a corrosion resistant Black Oxide finish, and finished with a Nylon Thread Patch. All RailScales 8-32 M-LOK products now ship with Torx T20 fasteners.

Ships Free and Made in USA

  • Drive Type: T20 Torx (Torx keys available here)
  • Thread Size: #8-32 (various lengths)
  • Material: 18-8 Stainless Steel
  • Finish: Black Oxide
  • Thread Lock: White Nylon Patch (Spec: IFI-124)

Regarding Lifetime Hardware warranty on RailScales products:

All orders with a 5 or less digit order number were sold with legacy hex fasteners, and is what will be sent out as a warranty replacement free of charge.

All orders with a 6 digit order number were sold with newer Torx T20 fasteners, and is what will be sent out as a warranty replacement free of charge.

 

 

© 2024 RailScales, LLC. All Rights Reserved. RailScales® are registered trademarks of RailScales LLC.

For all patents and trademarks, see www.railscalesip.com

Reviews

(5 reviews) Write a Review

5 Reviews Hide Reviews Show Reviews

  • 5
    Torque screws

    Posted by Tough stuff on Oct 24th 2024

    A great upgrade to the rail scales! No more fear of stripping bolts.

  • 5
    New T20 Screws Look Good

    Posted by Nathan Cunningham on Dec 21st 2023

    I always thought the 3/32 YFS screws that originally came with the railscales were almost to small. These new T20 screws look and function better then the old ones and I just replaced all my old screws with these new ones

  • 5
    Torxscrews

    Posted by Edward Pilsitz on Nov 20th 2023

    Way better than anything available at your local hardware store.

  • 5
    Better than the Allen screws

    Posted by Seth L on Nov 2nd 2023

    I love all of the RailScales products. However the one weak point was the allen screws that came with them. They would easily strip out and just start spinning. I bought six of these Torx head screws for a set of XOS scales. They are way better and hold them tightly in place. It’s a very small upgrade but I’m going to be upgrading all of mine over time. Thanks for the help with my order Jake!

  • 5
    Better than the hex!

    Posted by Seth on Oct 29th 2023

    I run RailScales on all of my rifles. The weakest part has always been the little allen screws. These new torque head screws are amazing and the fitment seems so much better. I know it’s a small upgrade but I will be replacing all of mine with these. Thanks Jake for your help with my order as well! Customer for life!