MonoLift™ Riser

MonoLift™ Riser - After fulfilling our 2022 UK MoD contract for the L143A2 Spear LT service rifle, the MonoLift riser is now available for the commercial market. The MonoLift riser was developed at the request of a UK MoD branch with specialized requirements to optimize the contract optics package placement on their newly issued Sig MCX LT variants (L143A2). The MonoLift riser is also at home on various other platforms with many other optic, magnifier, and even elevated laser combinations when reversed. The MonoLift riser utilizes the proven Scalarworks^® FUSE™ mounting hardware. The lower deck of the Monolift is 0.725" above host Pic rail, higher deck is 0.850". Datasheet and riser configurations available HERE. Optics are not included.

NSN: 1005-01-727-2954 (Carbon Black Anodizing)
NSN: 1005-01-727-2958 (Terra Bronze Anodizing)

Ships Free and Made in USA

Features

• Places both Romeo8T and Juliet4 on the same 2.26” optical center for a better heads-up posture
• The lower deck of the Monolift is 0.725" above host Pic rail, higher deck is 0.850".
• Shortens Romeo8T and Juliet4 overall length footprint by 0.240”
• Two aligned retention holes for lashing or wiring Romeo8T & Juliet4 to the riser 
• Ability to place the Juliet4 up to 5 pic slots further rear vs direct attaching to the upper receiver
• Fits flush with the front of the Romeo8T. The MonoLIft riser also fills the void under the rear, eliminating snagging (slings, gear straps, etc).
• Removes the need for a spacer on the Juliet4 which achieves the following 
  • Reduces side profile by 0.140” when deployed 
  • Eliminates tolerance stacking on the Juliet4 by omitting the OEM spacers, which tend to cant.
• Includes T25 Torx Driver Bit

Specs & Dimensions

• Mount Type: Mil-Std-1913
• Footprint: 7 Pic Slots
• Length: 5.169"
• Width: 1.184"
• Main Deck Height: 0.712"
• Rear Deck Height: 0.837" (0.125" higher)
• Added Height: 0.725 lower deck, 0.850" rear deck.
• Weight: 2.96oz w/ hardware
• Material: 7075-T6 Aluminum
• Finish: Type 03 Hardcoat Anodizing
• Color: Carbon Black^®, Terra Bronze^® (see anodizing disclaimer on our FAQ page, line 14 here)
• Fastener: Scalarworks® Kick™ T25 Torx Crossbolts
• Hardware: Scalarworks® Kick™ 15mm Clamps
• Flag: U.S.

ITAR, EAR, and CCL Notice
Some RailScales products maybe controlled for export by the International Traffic in Arms Regulations (ITAR), Export Administration Regulations (EAR) under the Commerce Control List (CCL). These controls take the form of export regulations and license requirements. As part of the express consideration provided for receipt of RailScales goods, technical data and/or services, you, our customer, acknowledge that the export, re-export or other transfer, directly or indirectly, of the goods, technical data and/or services provided by RailScales in violation of U.S. law is prohibited. Customers acquiring controlled goods, technical data and/or services from RailScales shall be responsible for obtaining any necessary U.S. or other government authorization required to ensure compliance with applicable export laws. For further information regarding the applicable laws, regulations, and policies please consult with your export control administrator or contact: U.S. Department of State www.pmddtc.state.gov/ddtc_public